{"id":2,"date":"2022-09-19T09:07:41","date_gmt":"2022-09-19T09:07:41","guid":{"rendered":"https:\/\/www.idromix.com\/en\/?page_id=2"},"modified":"2026-08-01T14:53:44","modified_gmt":"2026-08-01T14:53:44","slug":"products","status":"publish","type":"page","link":"https:\/\/www.idromix.com\/en\/products\/","title":{"rendered":"Products"},"content":{"rendered":"\n
\n

Idromix proportional dosing pumps<\/h1>\n\n\n\n

Idromix designs and assembles water-powered proportional dosing pumps in France that run with no electricity<\/strong>: mains water pressure alone is enough to drive them. Installed directly on your pipework, the pump draws in your product and injects it in proportion to the flow passing through it. The concentration stays the same whether you use 20 litres or 3,000 litres per hour.<\/p>\n\n\n\n

\n
Request information<\/a><\/div>\n\n\n\n
Download the brochure<\/a><\/div>\n<\/div>\n<\/div>\n\n\n\n
\n

THE PRINCIPLE<\/p>\n\n\n\n

\"Schematic\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
Mains water pressure drives the pump: no electric motor, no power supply.<\/figcaption><\/figure>\n<\/div>\n\n\n\n
\n

THE RANGE<\/p>\n\n\n\n

The iDose 3.5 range<\/h2>\n\n\n\n

A single range, available in variants that cover the vast majority of installations.<\/p>\n\n\n\n

Model<\/th>Dosing range<\/th>Connections<\/th><\/tr><\/thead>
iDose 3.5 DA 022<\/td>0.2% to 2%<\/td>3\/4\u2033 or 1\u2033 BSP<\/td><\/tr>
iDose 3.5 DA 055<\/td>0.5% to 5%<\/td>3\/4\u2033 or 1\u2033 BSP<\/td><\/tr>
iDose 3.5 DA 110<\/td>1% to 10%<\/td>3\/4\u2033 or 1\u2033 BSP<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
\"The\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
The three ranges overlap: if your target dosage falls in a shared zone, more than one model will suit.<\/figcaption><\/figure>\n\n\n\n

Common to the whole range: water flow of 10 to 3,500 l\/h<\/strong>, pressure of 0.3 to 6 bar<\/strong>, accuracy of \u00b1 5%<\/strong> of full scale, a built-in ON\/OFF function<\/strong> as standard, a natural polypropylene body and a motor with no metal parts. A translucent \u201cVision\u201d version lets you follow the motor stroke.<\/p>\n\n\n\n

See the full iDose 3.5 technical data sheet<\/a><\/p>\n<\/div>\n\n\n\n

\n

HOW TO CHOOSE<\/p>\n\n\n\n

How to choose your dosing pump?<\/h2>\n\n\n\n
\"How\n\t\t\t\n\t\t\t\t\n\t\t\t<\/svg>\n\t\t<\/button>
Four criteria are enough to determine the model and the setting.<\/figcaption><\/figure>\n\n\n\n
\n
\n
\n

1. Your water flow<\/h4>\n\n\n\n

The iDose 3.5 covers 10 to 3,500 l\/h. Below a drip feed or above 3,500 l\/h, let\u2019s talk.<\/p>\n<\/div>\n<\/div>\n\n\n\n

\n
\n

2. The concentration to inject<\/h4>\n\n\n\n

Choose the range that brackets your usual dosage: DA 022 for low doses, DA 110 for high ones. The setting shown corresponds to the actual concentration at the pump outlet.<\/p>\n<\/div>\n<\/div>\n\n\n\n

\n
\n

3. The connection diameter<\/h4>\n\n\n\n

3\/4\u2033 BSP (M 20\u00d727) or 1\u2033 BSP (M 26\u00d734), depending on your pipework.<\/p>\n<\/div>\n<\/div>\n\n\n\n

\n
\n

4. The nature of your product<\/h4>\n\n\n\n

The natural polypropylene and standard Viton FKM seals withstand aggressive products. Above 400 cSt viscosity, a dedicated kit is available.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n

\n

OPTIONS AND PARTS<\/p>\n\n\n\n

Tool-free maintenance<\/h2>\n\n\n\n